THOMSON DSC 725S Manual De Instrucciones página 40

D - CONFIGURATION AND USE
Important note: this user name and password is not
the same for your camera. They are specific to the
ThomView software and prevent shut-down of the
software by unauthorised persons, for example.
The main software window opens:
1 2 3 4 5 6
12
1 Add a new camera
Software settings
2
Access to videos saved on the computer
3
Access to the operations log in the
4
software
Selection of the number of cameras
5
on the screen at one time
Previous/next page. The software can
6
manage up to 64 cameras: these arrows let
you switch from cameras 5 to 8 then 9 to 12,
etc.
Go to full screen
7
Launch a patrol (compatible
8
cameras only)
Cut the image display for
9
all of the cameras
Date, current time, processor load and
10
hard disk use
11
List of cameras saved to the software
Display frames for camera images
12
Controls available for the selected
13
camera
Display of direction and zoom
14
controls (compatible cameras only)
To add your camera, click the
"Ajouter un périphérique [Add a device]" icon on the
top left:
14
EN
7 8 9 10 11
13 14
u . e i t y u r e c n s s o m o t h w . w w
OUTDOOR 1080P IP WIFI CAMERA
1 2 3 4
11 12
Camera UID (unique code shown on the
1
camera).
Camera username (default is
2
"admin")
Type of device: select "THOMSON IPC"
3
Name under which the camera will
4
appear in the software (according to your
preference)
P2P connection: tick to add a
5
camera using its UID. The UID of each of
the cameras is a unique code of 20 to 24
numbers and letters, shown on the camera
itself.
Current camera IP address
6
Camera password (none by default; leave
7
blank)
Test button for information entered:
8
enables you to check the connection,
user name and password entered
Current MAC address of the camera
9
Camera connection port (default 88)
10
Information related to the camera that you
11
are in the process of adding
Button that adds the camera with the
12
information shown at the top of the window
Results of a camera search on the
13
network connected to the computer
14 Search button: searches for
cameras on the network to which the
computer
Carry out the following steps to easily connect
your camera:
5 6 7 8 9
13
is connected
10
14