Biral A 802 Instrucciones De Instalación Y Funcionamiento página 71

71 english
Contents
1. Safety information
1.1 General remarks
1.2 Identification of notices
1.3 Staff qualification and training
1.4 Risk in the event of non-compliance
with the safety information
1.5 Safety-conscious work
1.6 Safety information for the operator/operating personnel
1.7 Safety information for installation,
maintenance and inspection works
1.8 Unauthorised reconstruction and production of spares
1.9 Improper operating methods
2. Transport/Storage
3. Characteristics, intended use
3.1 Requirement of the flow media
3.2 Operating temperature/operating pressure
4. Montage
4.1 Flushing out the heating system (with pump removed)
4.2 Antifreeze
4.3 Installation
4.4 Installation position
4.5 Installation of the pressure sensor
4.6 Return valve
4.7 Minimum pressure
5. Electrical connection
5.1 Supply terminal
5.2 Connecting diagram
6. Initiation/operating control
6.1 Generalities
6.2 De-aeration
6.3 Operational monitoring
6.4 Insulation resistance test
6.4.1 Insulation resistance test of pumps A..., AD...
6.4.2 High voltage test
for pump models A 802, AD 802 and A 1002
7. Settings
7.1 Control panel
7.2 Setting and adjustment of type of control (A1)
7.3 Setting the delivery head (A2)
7.4 Feed height and output
7.5 Further illuminated symbol (A3)
7.6 Factory setting of pump
Page 73
73
73
73
73
74
74
74
74
74
74
75
75
75
76
76
76
76
76
77
78
78
79
80
80
81
81
81
81
82
82
82
83
83
84
84
84
85
85