Gw 108 3G Configuration; Reset - Intelbras GW 108 3G Guia De Instalacion

5.5. GW 108 3G configuration

To configure the GW 108 3G, the user must download the following software: ITCI Manager and
Web programmer.
Important: the download must be done on the product page, to access it go to the Intelbras web-
site ( www.intelbras.com.br ) and search by product name.
To access the programming of the interface, you must connect it directly to the computer, as follows:
Antena (5-8)
Antena (1-4)
8 7 6 5 4 3 2 1 Ethernet

Reset

AC 90 - 240 50/60Hz
Connection to computer
Detailed information and GW 108 3G procedure of use can be found on the product manual, avai-
lable at www.intelbras.com.br .
Important: using the Mozilla Firefox browser (version 40.0).
®
Note:
it is possible to check GSM/3G signal level via configuration web page / web configurator / web interface.
5.6. Reset
To reset the device, press and release the Reset button on the rear panel of the GSM / 3G interface.
48