Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
The first time you run 3G Watcher:
Mac OS X 10.4.11
1.
After clicking Connect, open System Preferences and select Network.
2.
When the "New Port Detected" message appears, click OK.
Click Apply Now. Your modem connects to the network.
3.
Mac OS X 10.5
1.
After clicking Connect, the message "A new network interface has been
detected" appears. Click the Network Preferences... button.
2.
In the Network window, click Apply. Your modem connects to the network.
4
4
If you are prompted to configure a profile, click Yes. The Profiles window
opens. From the list of default profiles, select your service provider. If
your service provider is not on the list, contact them.
Click OK. The modem is ready to use.
To keep everything together, it's a good idea to thread the lanyard through the cap
and the modem, as shown in the illustrations.
1
1
3
3
2131222_Generic USB306_7_8_9 QSG_r1.0.indd BDY5
2131222_Generic USB306_7_8_9 QSG_r1.0.indd BDY5
Attach the lanyard
2 2
4 4
3
24/06/2009 1:13:37 PM
24/06/2009 1:13:37 PM
Publicidad
Tabla de contenido
