Introduction
IMPORTANT SAFETY INSTRUCTIONS
When using this product, basic safety precautions should always be followed
to reduce the risk of fire, electric shock, or personal injury.
1.
Read and understand all instructions. Keep this document for future
reference.
2.
Follow all instructions in this document and heed all warnings.
3.
Do not install this product near any heat sources such as radiators,
heat registers, stoves, or other devices (including amplifiers) that
produce heat.
4.
This product is used as the main disconnect device. Ensure that the AC
outlet is installed near this product and is easily accessible.
5.
The adaptor must remain connected at all times.
6.
To prevent the risk of fire or electrical shock, do not expose this product
to rain or any type of moisture, and do not plug it in upside-down (i.e.,
with the LAN jack pointing up).
7.
Do not touch the product during lightning storms.
8.
Unplug this product when unused for a long period of time.
9.
Refer all servicing to qualified service personnel. Servicing is required
when the unit does not operate normally, has been damaged in any
way, or after the unit has been dropped.
10.
Do not use this product outdoors.
11.
Unplug this unit from power outlets if it emits smoke, an abnormal smell
or makes unusual noise. These conditions can cause fire or electric
shock. Confirm that smoke has stopped and contact an authorized
service center.
SAVE THESE INSTRUCTIONS
4