Main Unit - Panasonic BL-PA300A Instrucciones De Operación

Main unit

(1) PLC Indicator
Lights to indicate that the adaptor is connected to the HD-PLC
network. For more information, see page 17.
(2) LAN Indicator
Lights when a LAN cable is connected to the adaptor, and flashes
when data is being sent or received. For more information, see
page 17.
(3) MASTER Indicator
Lights when the adaptor is configured as the master. For more
information, see page 17.
(4) SETUP Button
Used to register the adaptor (see page 11) or test the terminal's
network speed (see page 15).
(5) Mode Selector
The position of this selector during registration (see page 11)
determines whether the adaptor is configured as the master or as a
terminal.
(6) LAN Jack
Connects the adaptor to a network device, such as a broadband
router, hub, computer, etc. (see page 14).
[For assistance, please call: 1-800-272-7033]
(1) (5)
(2) (6)
(3) (7)
(4)
Introduction
9