Maxsys PC4020 Manual De Instalación página 2

Ocultar thumbs Ver también para PC4020:
Tabla de contenido

Publicidad

F C C C O M P L I A N C E S TAT E M E N T
CAUTION: Changes or modifications not expressly approved by Digital Secu-
rity Controls Ltd. could void your authority to use this equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the fol-
lowing measures:
Re-orient the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for
help.
The user may find the following booklet prepared by the FCC useful: "How to
Identify and Resolve Radio/Television Interference Problems". This booklet is
available from the U.S. Government Printing Office, Washington D.C. 20402,
Stock # 004-000-00345-4.
I m p o r t a n t I n formation
This equipment complies with Part 68 of the FCC Rules. On the side of this
equipment is a label that contains, among other information, the FCC registra-
tion number of this equipment.
N
T
C
OTIFICATION TO
ELEPHONE
phone company of the particular line to which the connection will be made,
and provide the FCC registration number and the ringer equivalence of the
protective circuit.
FCC Registration Number: F53CAN-20836-AL-E
Ringer Equivalence Number: 0.1B
USOC Jack: RJ-31X
T
C
R
ELEPHONE
ONNECTION
EQUIREMENTS
pany provided ringers, all connections to the telephone network shall be made
through standard plugs and telephone company provided jacks, or equivalent,
The customer shall notify the tele-
OMPANY
Except for the telephone com-
in such a manner as to allow for easy, immediate disconnection of the terminal
equipment. Standard jacks shall be so arranged that, if the plug connected
thereto is withdrawn, no interference to the operation of the equipment at the
customer's premises which remains connected to the telephone network shall
occur by reason of such withdrawal.
I
H
Should terminal equipment or protective circuitry
NCIDENCE OF
ARM
cause harm to the telephone network, the telephone company shall, where
practicable, notify the customer that temporary disconnection of service may
be required; however, where prior notice is not practicable, the telephone com-
pany may temporarily discontinue service if such action is deemed reasonable
in the circumstances. In the case of such temporary discontinuance, the tele-
phone company shall promptly notify the customer and will be given the
opportunity to correct the situation.
A
T
C
DDITIONAL
ELEPHONE
OMPANY
panel must be properly connected to the telephone line with a USOC RJ-31X
telephone jack.
The FCC prohibits customer-provided terminal equipment be connected to
party lines or to be used in conjunction with coin telephone service. Intercon-
nect rules may vary from state to state.
C
T
C
HANGES IN
ELEPHONE
OMPANY
phone company may make changes in its communications facilities, equip-
ment, operations or procedures, where such actions are reasonably required
and proper in its business. Should any such changes render the customer's ter-
minal equipment incompatible with the telephone company facilities the cus-
tomer shall be given adequate notice to the effect modifications to maintain
uninterrupted service.
R
E
N
INGER
QUIVALENCE
UMBER
quantity of devices that you may connect to your telephone line and still have
all of those devices ring when your telephone number is called. In most, but
not all areas, the sum of the RENs of all devices connected to one line should
not exceed five (5.0). To be certain of the number of devices that you may con-
nect to your line, you may want to contact your local telephone company.
E
M
F
QUIPMENT
AINTENANCE
ACILITY
telephone equipment, please contact the facility indicated below for informa-
tion on obtaining service or repairs. The telephone company may ask that you
disconnect this equipment from the network until the problem has been cor-
rected or until you are sure that the equipment is not malfunctioning.
Digital Security Controls Ltd. 160 Washburn St., Lockport, NY 14094
I
The security control
NFORMATION
E
F
QUIPMENT OR
ACILITIES
(REN)
The REN is useful to determine the
If you experience trouble with this
The tele-

Publicidad

Tabla de contenido
loading

Productos relacionados para Maxsys PC4020

Tabla de contenido