Technical Data - Husqvarna 535LK Manual Del Usuario

station to find out where to dispose excess fuel.
Drain the tank into the appropriate containers and in
a well ventilated area.
• Ensure that the product is cleaned and that a
complete service is carried out before long-term
storage.
• The transport guard must always be fitted to the
cutting attachment when the product is transported
or in storage.

Technical data

Engine
Cylinder displacement, cm
Cylinder bore, mm
Stroke, mm
Idle speed, rpm
Recommended max. speed, rpm
Speed of output shaft, rpm
Max. engine output, according to ISO 8893, kW/hp @ rpm
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Manufacturer/type of carburettor
Fuel tank capacity, litre/cm
Weight
Without fuel, cutting attachment and guard, kg
Noise emissions
Sound power level, measured dB (A)
Sound power level, guaranteed L
Sound levels
Equivalent sound pressure level at the operator's ear, measured according to EN ISO 11806 and ISO 7917, dB(A),
min./max.:
20
Technical data
3
3
dB (A)
WA
• Secure the product during transport.
• In order to prevent unintentional start of the engine,
the spark plug cap must always be removed during
long-term storage if the product is not under close
supervision and when you perform all service
measures.
• Allow the product to cool before you put in i storage.
535LK
34.6
38
30.5
2900
11700
8013
1.5/2.0 @ 8400
Yes
Yes
Walbro
Champion RCJ 6Y
0.5
Zama EL36D
0.6/600
5.8
111
114
331 - 003 -