Adding And Managing Cmc Users - Dell PowerEdge M1000e Guía De Configuración

3 The CMC Login page appears.
NOTE:
The default CMC user name is
root account is the default administrative account that ships with the CMC. For
added security, you should change the default password of the root account during
initial setup.
NOTE:
The CMC does not support extended ASCII characters, such as ß, å, é, ü, or
other characters used primarily in non-English languages.
NOTE:
You cannot log in to the Web-based interface with different user names in
multiple browser windows on a single workstation.
You can log in as either a CMC user or as a Microsoft
user.
4 In the Username field, type your user name:
– CMC user name: <user name>
– Active Directory user name: <domain>\<user name>,
<domain>/<user name> or <user>@<domain>.
NOTE:
5 In the Password field, type your CMC user password or Active Directory
user password.
NOTE:

Adding and Managing CMC Users

From the Users and User Configuration pages in the Web-based interface,
you can view information about CMC users, add a new user, and change
settings for an existing user.
NOTE:
For added security, Dell strongly recommends that you change the default
password of the root (User 1) account. The root account is the default
administrative account that ships with the CMC. To change the default password for
the root account, click User ID 1 to open the User Configuration page. Help for that
page is available through the Help link at the top right corner of the page.
NOTE:
You must have User Configuration Administrator privileges to perform the
following steps.
1 Log in to the Web-based interface. See "Logging in to the CMC Using the
Web-Based Interface" on page 25.
2 Select Chassis in the system tree.
26
Configuration Guide
This field is case sensitive.
This field is case sensitive.
, and the password is
root
. The
calvin
®
Active Directory
®