Ingersoll Rand 170PG Serie Manual De Uso Y Mantenimiento página 2

Power tools can vibrate in use. Vibration, repetitive
•
motions or uncomfortable positions may be harmful to
your hands and arms. Stop using any tool if
discomfort, tingling feeling or pain occurs. Seek
medical advice before resuming use.
Keep body stance balanced and firm. Do not
•
overreach when operating this tool. Anticipate and be
alert for sudden changes in motion, reaction torques,
or forces during start up and operation.
Tool and/or accessories may briefly continue their
•
motion after throttle is released.
To avoid accidental starting - - ensure tool is in "off"
•
position before applying air pressure, avoid throttle
when carrying, and release throttle with loss of air.
Ensure work pieces are secure. Use clamps or vises to
•
hold work piece whenever possible.
Do not carry or drag the tool by the hose.
•
Do not use power tools when tired, or under the
•
influence of medication, drugs, or alcohol.
Never use a damaged or malfunctioning tool or
•
accessory.
Do not modify the tool, safety devices, or accessories.
•
Do not use this tool for purposes other than those
•
recommended.
Use accessories recommended by Ingersoll- -Rand.
•
Never operate a Percussion Tool unless an accessory is
•
properly installed and the tool is held firmly against
the work.
Always use a retainer, when furnished, in addition to
•
proper barriers to protect persons in surrounding or
lower areas from possible ejected accessories.
When wearing gloves and operating models with
•
inside trigger, always be sure that the gloves will not
prevent the trigger from being released.
Wear safety shoes, hard hat, safety goggles, gloves,
•
dustmask and any other appropriate protective
clothing while operating the tool.
Do not indulge in horseplay. Distraction can cause
•
accidents.
Keep hands and fingers away from the throttle lever
•
until it is time to operate the tool.
WARNING
Always wear eye protection
when operating or
performing maintenance
on this tool.
The use of other than genuine Ingersoll- -Rand replacement parts may result in safety hazards, decreased tool performance, and
increased maintenance, and may invalidate all warranties.
Repairs should be made only by authorized trained personnel. Consult your nearest Ingersoll- -Rand Authorized Servicenter.
WARNING SYMBOL IDENTIFICATION
Never rest the tool or chisel on your foot.
•
Never point the tool at anyone.
•
Compressed air is dangerous. Never point an air hose
•
at yourself or co- -workers.
Never blow clothes free of dust with compressed air.
•
Be sure all hose connections are tight. A loose hose
•
not only leaks but can come completely off the tool
and while whipping under pressure, can injure the
operator and others in the area. Attach safety cables
to all hoses to prevent injury in case a hose is
accidentally broken.
Never disconnect a pressurized air hose. Always turn
•
off the air supply and bleed the tool before
disconnecting a hose.
The operator must keep limbs and body clear of the
•
chisel. If a chisel breaks, the tool with the broken
chisel projecting from the tool will suddenly surge
forward.
Do not ride the tool with one leg over the handle.
•
Injury can result if the chisel breaks while riding the
tool.
Know what is underneath the material being worked.
•
Be alert for hidden water, gas, sewer, telephone or
electric lines.
Use only proper cleaning solvents to clean parts. Use
•
only cleaning solvents which meet current safety and
health standards. Use cleaning solvents in a well
ventilated area.
Do not flush the tool or clean any parts with diesel
•
fuel. Diesel fuel residue will ignite in the tool when the
tool is operated, causing damage to internal parts.
When using models with outside triggers or throttle
levers, take care when setting the tool down to prevent
accidental operation.
Do not operate the tool with broken or damaged parts.
•
Never start the tool when it is lying on the ground.
•
This tool is not designed for working in explosive
•
atmospheres.
This tool is not insulated against electric shock.
•
WARNING
Read this manual before
operating tool.
2
WARNING
Always wear hearing
protection when operating
this tool.