Powering Up Your Router - Belkin F5D9630-4 Manual Del Usuario

Connecting your Router

Powering Up your Router

1.
Connect the supplied power adapter to the Router power-input
plug labeled "Power".
Note: For safety and performance reasons, only use the supplied
power adapter to prevent damage to the Router.
2.
After connecting the power adapter and the power source is turned on,
the Router's power icon.
take a few minutes for the Router to fully start up.
3.
Turn on your computers. After your computers boot up, the LAN
status LED
to which a wired computer is connected. These lights show
you the connection and activity status. Now you are ready to
configure the Router for ADSL connection.
on the front panel should be on. It might
on the front of the Router will be on for each port
10 10