LD Systems LDZONEX1208 Manual De Usuario página 13

A status bar in the device window shows the progress of the firmware upgrade.
DO NOT SWITCH THE DEVICE OFF OR DISCONNECT IT FROM THE COMPUTER. If the device if switched off or disconnected from the computer during the
firmware upgrade, this may result in a complete corruption of the processor. In this case, a "USB Firmware Recovery" must be performed.
As soon as the firmware file is successfully downloaded to the device, it automatically restarts and the internal data is updated. This may take a few
minutes. During this time, the network indicator is RED and the device is offline.
When the firmware upgrade is complete, the green "ON" indication reappears.
NOTE: The yellow area with the message "No Data" means that no design has been loaded to the device.
13