Accessories - Aprimatic UNICO RR-SE Manual De Instrucciones

4.2 Accessories

CA41 module
The insertion of this module in the receiver allows the user to
have an extra reception channel available: in this way, with the
SAME UNIT AND THE STANDARD REMOTE CONTROL, it is
possible to control two different devices.
CA43 module
The insertion of this module in the receiver allows the user to
have three extra reception channels available: in this way, with the
SAME UNIT, it is possible to control four different devices.
16 kb or 128 kbits memory expansion module
The insertion of this module in the receiver allows you to control
as many as 1500 devices with the receiver.
IP44 external container
Programming tools
Aprimatic receivers and remote controls may also be pro-
grammed using the following:
• APRITOOL programmer for access control management
• APRICOT-MANAGER access control management software
• Connection base for programming APRIBASE 1 transmitters.
Warning:
1) Power must arrive from a limited power source ( I < 8A
and P < 100VA).
2) Power must arrive from a SELV external source. The
separation between mains voltage and output must comply
with IEC/EN 60558-2-6.
APRIMATIC s.r.l. hereby declares that the
UNICO RR-SE 433MHz receiver Ref. 41923/009
complies with the essential requirements and other
applicable regulations of Directive 1999/5/EC.
The declaration of conformity may be consulted at
www.aprimatic.it or can be requested to the Aprimatic
customer service.
14