Parts & Supplies - Bissell PET HAIR ERASER LIFT-OFF 2087 Serie Guia Del Usuario

Clean/Replace Pre-Motor Filters
WARNING
To reduce the risk of electrical shock, turn power switch OFF and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
WARNING
Do not operate vacuum with damp or wet filters. Allow components to dry before
reassembling the dirt container.
1
Press the dirt container Release Button
and pull away from vacuum.
3
Pull down on the pre-motor filter to
remove.
NOTE: Replace this filter every 3 to 6 months. Visit BISSELL.com for Style 2087 filter
replacements.
Parts & Supplies
For Parts and Supplies, go to www.BISSELL.com and enter
your model number in the search field.
12
www.BISSELL.com
2
Twist tank cover to the unlock position then
pull up on handle.
4
There are three pieces to the pre-motor filter.
All are washable. Be sure to dry all filter layers
separately and that they are fully dry before
reassembling and returning to the vacuum.
24
h