Operations - Bissell PET HAIR ERASER LIFT-OFF 2087 Serie Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Operations

WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating
procedures.
1
Power
ON/OFF
Switch
Turn vacuum on by pressing Power Switch on
(I - ON and O - OFF). Press Brush Roll switch to
run the PowerBrush for carpet cleaning (brush
roll is on when light on switch is illuminated).
See page 15 to maintain the brush roll.
NOTE: The brush roll will automatically shut off when vacuum is locked in upright
position, recline to reactivate.
NOTE: In the unlikely event that hair wrapped around your brush roll, run vacuum
back and forth on clean carpet several times to help release any wrapped hair.
NOTE: Turn off the brush roll when vacuuming hard or delicate surfaces that may
be caught by the rotating brush. This could include hard wood, tiled floors, small
area rugs or frieze carpets that have long delicate fibers or threads.
Adjusting the Floor Type Setting
1
Locate the Floor Type Setting on
the side of the vacuum.
8
www.BISSELL.com
2
Brushroll
ON/OFF
Switch
2
Step gently on base and pull
back on handle to recline.
Turn the knob to the LEFT
for high pile carpet and to
the RIGHT for bare floors.

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido