Getting started
Getting started
Notifications & Characteristics & Accessories
Information relating to the environment
This television is designed to consume less power in
a bid to protect the environment. In order to effectively
reduce your electric energy consumption, you have
to follow the steps below:
You can use the Power Save Mode setting, located
in the Picture menu. If you set the Power Save Mode
as Eco, the TV will switch to energy-saving mode
and the luminance level of TV set will be decreased
to the optimum level. Note that some picture settings
will be unavailable to be changed when the TV is in
Power Save Mode.
If pressed Right button, "Screen will be off in 15
seconds." message will be displayed on the screen.
Select PEED and press OK to turn the screen off
immediately. If you don't press any button, the screen
will be off in 15 seconds. Press any button on the
remote or on the TV to turn the screen on again. If
you disable Power Save Mode, picture mode will be
automatically set to Dynamic.
Turn the television of and disconnect it when not
in use. This good practice will also help you to
economise energy.
Standby notifications
1. If the television does not receive any incoming
signal (an antenna or an HDMI source for
example) for 5 minutes, it will go on standby. The
next time it is turned on, the following message
will appear : "TV switched to stand-by mode
automatically because there was no signal for
a long time". Press OK to continue.
2. If the television stays inactive for 4 hours, it will
enter standby mode. The next time it is turned on,
the following message will appear: "TV switched
to stand-by mode automatically because no
operation was made for a long time". Press
OK to continue.
Functions
• 3D Viewing: This product supports the viewing of
3D content from devices such as a High Definition
Satellite Receiver or Blu-ray Player via HDMI, PC,
YPBPR, USB inputs or via an available broadcast.
• Colour television with remote control.
• Digital tuner cable and High definition TNT (DVB-
T/C)
• Fully integrated digital terrestrial-cable TV(DVB-T-C)
• The HDMI ports are meant for devices with HDMI
plugs.
• USB ports.(with digital video tape-recorder function)
• Programme recording.
• Programme timeshifting.
• OSD Settings Menu.
• Jack socket for external devices (video camera,
video game, audio player, etc.)
• Stereo sound system.
• Teletext.
• Headphone jack.
• Automatic settings system.
• Manual setting.
• Automatic shutdown which can be set between 2 to
6 hours maximum without using the remote control.
• Programmable shutdown.
• Parental control lock
• Automatic sound-off when there's no transmission.
• NTSC Video .
• AVL (Automatic Volume Limitation)
• PLL Tuner (Frequency scanning).
• PC port with Plug & Play function.
• Instant Plug&Play for Windows 98,) ME, 2000, XP,
Vista.
• Ethernet (LAN) for Internet connectivity and service
• 802.11n WIFI Support (Optional)
• DLNA
Accessories included
• Remote control
• User manual
• Batteries not included
• Side AV connection Cable
• 3D Glasses x 4
The control button & the Functioning of the TV
1. Standby button
2. TV/AV button
3. Programme Up/Down buttons
4. Volume Up/Down buttons
English - 32 -