Dimplex CX-WIFI-A El Manual Del Propietario página 17

General Functions
also be flashing) and the
will appear. Press the
save the changes and revert back
to operation mode.
! NOTE: The time can also be
changed by holding down the
time display icon for 3 seconds,
but only the Day, Time and Type
of clock will be displayed to
change.
2. Changing the Time
! NOTE: Since the unit will be
connected to Wi-Fi, the day and
time will automatically set and this
section will not be applicable.
When you initially go into the
setup menu, the
for the time adjustment will be
flashing and the optional selected
time setting also will appear
(flashing).
Using the and
time can be adjusted.
! NOTE: If the button is held
down for longer the time will
increase faster.
By pressing the flashing time set-
ting, the time display will change
to match the new setting. I.e.
2:12pm will change to 14:12.
As soon as any adjustment is
icon
icon to
and icons
icons the
made the
Press the
changes and revert back to op-
eration mode.
! NOTE: The time can also be
changed by holding down the
time display icon for 3 seconds,
but only the Day, Time and Type
of clock will be displayed to
change. Press the
save the changes and revert back
to operation mode.
3. Changing the Temperature
Measurement Unit
When you initially go into the
setup menu, the temperature will
disappear and the temperature
measurement icon will begin to
flash. By pressing the icon it will
toggle between °C and °F.
As soon as any adjustment is
made the
Press the
changes and revert back to op-
eration mode.
! NOTE: The Temperature
Measurement unit can also be
changed by holding down the
temperature set point display for 3
seconds, and it will change to the
icon will appear.
icon to save the
icon to
icon will appear.
icon to save the
17