Dimplex CX-WIFI-A El Manual Del Propietario página 18

General Functions
other Temperature Measurement
unit.
4. Synchronization Function
The controller features CON-
NEX , a wireless technology
TM
that works with Dimplex CON-
NEX enabled heaters to provide
TM
simple whole home connectivity
and comfort. CONNEX
lers are available to control one
or multiple heaters within a 50'
(15 m) radius. In order for the
controller to have this function,
the CONNEX
TM
and the controller will need to be
synchronized.
! NOTE: See Initial Setup sec-
tion for detailed instructions.
5. Lock Function
The controller can be "Locked" so
that the display on the controller
is disabled to prevent any chang-
es to the settings in the system.
To Enable:
1. Press the
2. Enter the sequence Zone 1,
Zone 2, Zone 3 and Zone 4,
then press the
The Controller will display the
Icon and continue to operate
based on the settings and signals
18
control-
TM
enabled heater
Icon.
Icon.
from the controller.
! NOTE: Adjustments can
be made to individual heaters
by entering its specific unlock
sequence and adjusting the set
point.
CAUTION: The adjusted
heater will only retain the new set
point until an event occurs on the
controller and a new set point is
sent.
To Disable:
1. Press and hold the
3 seconds.
2. Enter the sequence Zone 1,
Zone 2, Zone 3 and Zone 4,
then press the
Icon for
Icon.
www.dimplex.com