System Toolbox; User Management; User Code Setup; Adding A User Code - Nortek Security & Control 2GIG e Serie Guia Del Usuario

GC2e Wireless Security System | User Guide

SYSTEM TOOLBOX

USER MANAGEMENT

The system installer has programmed a master user code
for your system. This code can be used to control the
system, as well as to assign and change the other 63 user
codes and access options. The master user code can also
access several system settings in the Toolbox.
NOTE: The other 64 user codes are restricted from
accessing settings in the Toolbox.

User Code Setup

IMPORTANT: The holder of the master user code is the
only user who has permission to set up other user codes.
To set up the user codes:
1 At the Home screen, tap Security.
2 At the Security screen, tap Menu.
3 At the Menu screen, tap Toolbox.
4 Enter the master user code to access the Toolbox
5 On the Toolbox (1 of 3) screen, tap User Management.
6 The Users Management screen displays 3 users at a
time. Use the  and  arrows to scroll through the list.

Adding a User Code

IMPORTANT: User codes 0000 and 0001 are not
permitted.
1 Tap one of the Add User buttons.
2 Enter a unique four (4)-digit code for the new
user code. Then tap OK.
3 Enter the code again to confirm it. Then tap OK.
4 At the Confirmation screen, tap OK to return to the
User Management screen.

User Code Validity

After the Confirmation screen appears and you click OK,
the user codes Access Option screen appears. Select one
of the three options to validate the user code:
● Select Always to set this user code to always be
valid. Tap Back.
● Select Never to set this user code to never be valid.
Tap Back.
● Select By Schedule to set this user code to be valid
only for selected days and/or times.

User Code Access Schedules

You can set up user codes with one or more Access
Schedules. Access Schedules limit access to your system
to people with user codes (such as maintenance personnel,
service, or cleaning personnel).

Adding/Editing User Access Schedules

1 If you selected By Schedule for the user code, the
Edit Schedules button appears.
2 To select or edit an existing user code Access
Schedule, tap Edit Schedules. You can also create a
new user schedule from the Edit Schedules screen.
3 The User Access Schedules screen displays all
current schedules for the user code.
4 To add a new schedule, tap Add Schedule or to edit a
schedule, tap an existing schedule.
5 You can select 1 of 3 Schedule types:
● Recurring. Recurring applies to the days of the week
and time period that this user code is valid.
● Date. Date applies to a single specific date and time
period that this user code is valid.
● Date Range. Date Range defines a starting date,
an ending date, and time period during which this
user code is valid.
26
Copyright © 2019 Nortek Security & Control