i.safe MOBILE IS910.1 Manual Del Usuario página 8

6
VOLUME DOWN KEY: Volume down .
7
CONTROL LED: Control LEDs for SD card, SIM and flash .
8
POWER KEY: Long press to power ON/OFF the device . Short press to power
ON/OFF the standby mode .
9
FUNCTION KEY M1: Optional key used by different apps .
10
FUNCTION KEY M2: Optional key used by different apps .
11
BACK KEY: Return to previous screen .
12
HOME KEY: Return to Homescreen .
13
CURRENT APPLICATION: Close all applications .
14
USB OTG: Connect external USB devices .
15
EARPHONE JACK: Connect an earphone .
16
MAGNETIC CHARGER PORT: To charge the device with the delivered
magnetic i.safe PROTECTOR 3.0 USB cable .
17
DOCKING STATION: Connect to external docking station .
18
MICRO USB TYP C: To charge and to connect the device with the delivered
i.safe PROTECTOR 2.0 USB cable .
SETTING PASSWORD
In settings a passwort is required, use standard password "1234".
IMPORTANT INFORMATION!
FACTORY RESET/ACTIVATE OEM MODE
If you have set up a Google Account, it is important to proceed with the following
steps before you make a factory reset . This ensures that all private data will be deleted
on the device:
<Settings> <About phone>
developer mode)
unlocking>
activate
<Factory data reset>
If you do not enable the OEM unlocking, the device will ask you to sign in with the
previously synced Google Account after the restart . In that case the device is unusable
for other user .
RECYCLING
The crossed-out wheeled-bin symbol on your product, battery, literature, or packaging
reminds you that all electrical and electronic products, batteries, and accumulators
must be taken to separate collection at the end of their working life . This requirement
applies in the European Union . Do not dispose of these products as unsorted municipal
waste . Always return your used electronic products, batteries, and packaging materials
8
tip seven times on
back to <Settings>
<Allow>
back to
<Reset phone>
<Build number>
<Developer options>
<Settings> <Backup & reset>
<Erase everything>
(to activate the
enable <OEM