Oldsmobile Achieva 1996-1998 - Metra 95-2009 Instrucciones De Instalación

Hummer H2 2003-2007
5. Remove (6) Phillips screws from top of
center console. (Figure E)
6. Remove (2) Phillips screws from inside pocket on
back of center console, then unclip and remove.
(Figure F)
7. Remove (1) 10 mm bolt to right of shift lever.
8. Remove (2) Phillips screws from under console box
on driver's side and (2) Phillips screws from under
console trim-top on passenger side.
(Figure E)
9. Slide control assembly rearwards.
10. Remove (2) T-30 Torx bolts from top of radio/
climate control trim and unclip and remove.
(Figure G)
11. Remove (3) 9/32" screws that hold the radio in.
(Figure G)
Continue to tab instructions
(Figure F)
Dash Disassembly
(Figure G)
15
Oldsmobile Achieva
1996-1998
1. Open the glove box, press inward on the walls
of the glove box liner and remove the liner.
2. Remove (10) Torx head screws from the glove
box location.
3. Remove (2) 9/32" hex head screws under the
steering column.
4. Unclip the dash trim bezel. (Figure A)
5. Remove the screws securing the factory head unit
and disconnect the wiring.
Continue to tab instructions
(Figure A)