Cadillac Fleetwood/
Brougham 1990-1996
(Figure B)
(Figure C)
(Figure D)
Dash Disassembly
Cadillac Fleetwood/
Brougham 1990-1996
Radio Bracket
Disassembly
1. Remove (4) 10mm nuts, (2) on top of the radio and
(2) on the bottom of the radio, that hold the factory
mounting brackets on.
2. Save brackets and nuts for kit assembly.
Continue to tab instructions
Top Factory Bracket
Remove 10mm nuts
Remove 10mm nuts
Bottom Factory Bracket
7
Cadillac Eldorado/Seville
1992-1995
1. Using a panel removal tool pry out on the radio
trim ring and remove.
Caution: Use extreme care when removing.
2. Gently pry up on the ashtray/gear shifter trim bezel
and remove. (Figure A)
Note: Some models are equipped with bezels
made of real wood.
3. Remove (2) nuts securing the bottom of the factory
head unit and disconnect the wiring.
Continue to tab instructions
1
(Figure A)