Troubleshooting; Technical Support - Monoprice PID 14567 Manual De Usuario

5. Insert an F1AL250V fuse (not included) into the fuse clip. Optionally, insert another
F1AL250V fuse into the spare fuse tunnel.
6. Reinsert the fuse holder and push it in completely to seat it in place.
7. Using a Phillips screwdriver, remove the two screws holding the plastic cover over
the Voltage switch, then remove the cover.
8. Using a flat head screwdriver, slide the Voltage switch to the 220~240 V~ position.
9. Replace the plastic cover over the Voltage switch and secure it to the rear panel
using the two screws removed in step 7 above.
You will need to supply a power cord appropriate for the standard employed in your
locale. Monoprice stocks and sells AC power cords with a C13 connector for use in various
international markets, including the UK, EU, and Australia.

TROUBLESHOOTING

Q: There is no sound from the subwoofer.
A: Ensure that the subwoofer is plugged into an AC outlet and that it is turned on.
Double check the speaker wire or line level connection to the subwoofer. Try turning
up the subwoofer's volume control. Try flipping the phase switch to the other position.

TECHNICAL SUPPORT

Monoprice is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come online
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website (www.monoprice.com)
during regular business hours, 7 days a week. You can also get assistance through email by
sending a message to tech@monoprice.com
13