Monoprice PID 14567 Manual De Usuario página 4

power cord will not fit in your AC outlet, please contact an electrician to have the
obsolete plug replaced.
 Do not allow the power cord to be walked on or pinched. Do not run the power
cord under a rug, as doing so could cause a fire.
 Ensure that your AC power outlet provides voltage within the range specified on
the rear panel of the subwoofer.
 When removing cords or cables, do not pull on the cable. Always grasp the
connector/plug head when removing cords or cables.
 If the fuse needs replacing, replace it with the same type, as specified in the
SPECIFICATIONS
 This unit ships set for nominal 110~120 VAC operation. If changing the input voltage
level, you must also change the fuse to the type specified in the
INPUT POWER
and in the
 Always remove power and unplug the subwoofer before attempting to replace the
fuse.
 Do not bypass the purpose of the fuse by shorting the contacts or by any other
means.
 Install the subwoofer in a place where the power plug can be readily accessible so
that you can quickly unplug the unit in the event that a safety incident occurs.
 Do not use full volume until after the speaker has been fully broken-in.
 If you hear distortion reduce the volume until the distortion is no longer audible.
Distortion can sound like a buzzing, scratching, or hammering sound. Distortion can
damage or destroy delicate speaker coils.
 To avoid annoying feedback, ensure that any turntable is isolated from the
vibrations produced by the speakers and subwoofer.
 Extreme bass frequencies and volume can distort the image on a nearby television.
If this occurs, move the subwoofer further away from the TV.
 Do not use cleaning fluids, solvents, or other chemicals to clean the speaker cabinet.
Do not use paper towels or other abrasive materials or cleaners. Use only a soft, dry
INPUT POWER
and in the
sections for the voltage level being used.
sections.
4
SPECIFICATIONS