August MS515 Manual De Instrucciones página 2

User Manual
Thank you for purchasing the August MS515 Bluetooth Stereo
Speakers. This user manual is designed to familiarize you with all the
features of this device. Please take the time to read this user manual
carefully, even if you are already familiar with a similar product.
Safety
To ensure the safety of you and others, please read the Safety
Instructions before using this device. Please do not disassemble this
product, it can be unsafe and will invalidate the manufacturer's
warranty.
Disposal
Please ensure the product and accessories are disposed of in
compliance with the WEEE (Waste Electrical and Electronic
Equipment) Directive and any other regulations applicable to your
country. Always check with the environment agency and any other
relevant authorities for current disposal regulations.
Customer Service
You can contact us by phone on: +44 (0)845 250 0586 or by email at:
service@augustint.com should you require further technical support
or customer service.
-1-
Quick Start Guide MS515
Main (Left) Secondary (Right)
1 3 4 5 5
2 1 2
Please fully charge both speakers before first use. To charge, use the
power cable to connect both speakers to a powered USB port.Whilst
charging, the LED lights red and turns off once fully charged.
1.Use the connecting cable to connect the main and secondary
speaker.
2
2. Switch both speakers on.
Note: The main speaker will automatically enter pairing mode,
indicated by the LED strobing alternately red and blue, if the last
used source device is not available. If the MS515 does not enter
pairing mode automatically, press and hold the multifunction
switch until a two tone notification sounds.
3. Pair your source device with "MS515"
Note: If you are unfamiliar with the Bluetooth feature of your
source device, please refer to its user manual for detailed
instructions.
4. Once successfully paired and connected, the blue LED starts to
flash once per 2 seconds.
1. Power Socket
2. Connecting Socket
3. Audio In
4. Multifunction Switch
5. Power Switch
2
-2-