Volume And Track Control; Audio-In - August MS515 Manual De Instrucciones

For a TV or Set-Top Box with Integrated Bluetooth
Connection
1) Scan for available Bluetooth devices on your TV or Set-Top Box
(see your TV or Set-Top Box user manual for instructionsif
needed).
2) Select "MS515" from available devices.
3) Once successfully paired and connected, the blue LED starts to
flash once per 2 second.
For TV with No Bluetooth Connection
To connect to a TV or Set-Top box without a Bluetooth
connection, you will require a Bluetooth Transmitter such as the
August MR250.
1) Plug the transmitter into the headphone socket of your TV.
2) Switch the transmitter on and enter pairing mode (for more
information, please refer to the transmitter user manual). Please
ensure that no other Bluetooth device is available for pairing
nearby.
3) The transmitter will automatically pair with the MS515. Once
successfully paired and connected, the blue LED starts to flash
once per 2 seconds.
Note: If no source device is available to pair after entering paring
mode in 10 minutes, the main speaker will turn off automatically. To
re-start it, please manually switch it from On to Off and switch On
again.

5.3 Volume and Track Control

5.3.1 Volume Control
To adjust the volume either slide and hold the multifunction
switch to the left or right or adjust the volume on your source
device.
-7-
5.3.2 Track Control
To control the track slide the multifunction switch to the left or right
to skip or repeat track. Press the multifunction switch to play or
pause playback.
Note: Volume and track control require A2DP on your source device,
please refer to its user manual to see if it has A2DP.

5.4 Audio-In

To use the MS515 with a non-Bluetooth source device, connect the
main and secondary speaker with the connecting cable then turn both
on. Once both are switched on, connect the source device to the main
speaker audio in socket using the provided 3.5mm audio cable.
-8-