Dash Disassembly - Metra 99-9225 Instrucciones De Instalación

CAUTION: Do not remove any
connectors with the key in the on
position, and do not cycle the key
with any modules disconnected.
1. Move the shifter to the rearmost
position, unsnap the shifter trim
and move it to one side. (Figure A)
2. Remove (2) Torx screws from the
bottom of the radio/climate control
panel, then disconnect the plugs
and remove. (Figure B)
3. With the radio/climate control
panel removed from the vehicle,
remove (4) screws securing the
radio to the bracket, then release
the clips and remove the radio.
(Figure C)
Continue to kit assembly

Dash Disassembly

(Figure A)
99-9225
(Figure B)
2
(Figure C)