Dash Disassembly - Metra 99-6520B Instrucciones De Instalación

1. Using the panel removal tool, carefully
unclip and remove the trim panel along
the top of the glove box over to the
passenger's side A/C vent. (Figure A)
2. Unsnap and remove the small trim panel
to the left of the hazard button. (Figure A)
3. Remove (2) Phillips screws securing the
radio/climate control panel, then unclip,
unplug and remove the panel. (Figure B)
Note: A climate extension harness is
provided to relocate the climate controls
to a lower position in the center console.
4. Remove (4) Phillips screws securing the
radio chassis. Slide the chassis out, then
unplug and remove the chassis. (Figure C)
Note: The white 4-pin harness will be
reused in Kit Assembly.
Continued on the next page
2

DASH DISASSEMBLY

(Figure A)
(Figure C)
(Figure B)
(Figure D)
|
386.257.1187 MetraOnline.com