Metra 99-7426 Instrucciones De Instalación página 2

1. Unclip trim panel at bottom center
of dash. (Figure A)
2. Remove (1) Phillips screw from
bottom of each side trim panel.
Unclip and remove the side trim
panels. (Figure B)
3. Remove (3) Phillips screws
securing the climate control then
unclip, unplug and remove it from
the sub dash. (Figure C)
Continue on next page
(Figure A)
Dash Disassembly 99-7426
Nissan Murano 2009-up
(Figure B)
(Figure C)
4. Remove (2) Phillips screws
from the panel below the radio
(containing the passenger air
bag light) then unclip, unplug and
remove the panel. (Figure D)
5. Remove (6) Phillips screws
securing the radio to the sub
dash. Unplug and remove radio.
(Figure E)
Continue to kit assembly
2
(Figure D)
(Figure E)