Descargar
Compartir
Imprimir esta página
  1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Accesorios de Automóviles
  5. 99-7343
  6. Instrucciones de instalación

Metra 99-7343 Instrucciones De Instalación

Ocultar thumbs Ver también para 99-7343:

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Descargar este manual
INSTALLATION INSTRUCTIONS FOR PART 99-7343
(For models equipped without Nav and with auto climate controls)
KIT FEATURES
• ISO DIN head unit provision with pocket
• DDIN head unit provisions
• Painted black and silver to match factory dash
KIT COMPONENTS
• A) Radio Housing • B) (2) A/C Vent Trim Panels
• C) DDIN Brackets • D) Display Brackets
• E) Pocket • F) (12) 1/2" Phillips screws
• G) (2) #8X1/4" Pan Head screws
• H) (4) #8X3/8" Truss Head screws
B
A
WIRING & ANTENNA CONNECTIONS (Sold Separately)
Wire harness:
• 70-7304 2010 Kia/Hyundai Harness
• 70-7305 2010 Kia/Hyundai Amp Bypass Harness
Antenna adapter:
• Not Required
Panel Removal Tool • Phillips Screwdriver • Socket Wrench
1-800-221-0932
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
All manuals and user guides at all-guides.com
APPLICATIONS
2011 Hyundai Sonata
99-7343
C
F
TOOLS REQUIRED
METRA. THE WORLD'S BEST KITS.™
D
E
G
H
metraonline.com

Publicidad

loading

Manuales relacionados para Metra 99-7343

Resumen de contenidos para Metra 99-7343

  • Página 1 All manuals and user guides at all-guides.com INSTALLATION INSTRUCTIONS FOR PART 99-7343 APPLICATIONS 2011 Hyundai Sonata (For models equipped without Nav and with auto climate controls) 99-7343 KIT FEATURES • ISO DIN head unit provision with pocket • DDIN head unit provisions • Painted black and silver to match factory dash KIT COMPONENTS • A) Radio Housing • B) (2) A/C Vent Trim Panels • C) DDIN Brackets • D) Display Brackets • E) Pocket • F) (12) 1/2” Phillips screws • G) (2) #8X1/4” Pan Head screws • H) (4) #8X3/8” Truss Head screws WIRING & ANTENNA CONNECTIONS (Sold Separately) Wire harness: • 70-7304 2010 Kia/Hyundai Harness...
  • Página 2 – ISO DIN head unit provisions – DOUBLE DIN head unit provisions Caution Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition. *NOTE: Refer Also to the instructions included with the aftermarket radio.
  • Página 3 All manuals and user guides at all-guides.com 99-7343 Dash Disassembly 1. Unclip and remove the 2 trim panels surrounding the shifter and pocket. (Figure A) 2. Remove (2) Phillips screws at the bottom left and right side of the radio trim panel. (Figure B) 3. Unclip and remove the radio trim panel including climate control and vents. (Figure C) 4. Remove (4) Phillips screws securing the radio. (Figure D) (Figure B) 5. Remove (4) Phillips screws securing the display then remove the factory brackets from the display. (Figure D) Continued on next page (Figure C) (Figure A) (Figure D)
  • Página 4 All manuals and user guides at all-guides.com 99-7343 Dash Disassembly 6. Unclip and remove the Hazard switch 8. Remove (4) Phillips screws securing from the radio panel. (Figure E) the climate control to the radio panel. (Figure E) 7. Remove (2) Phillips screws securing the passenger air bag light assembly. 9. Remove (8) Phillips screws securing (Figure E) the a/c vents then unclip and remove them from the factory panel. (Figure E) (Figure E)
  • Página 5 All manuals and user guides at all-guides.com 99-7343 Kit Assembly 1. Snap the a/c vents into the a/c vent 3. Snap the hazard switch into the main trim panels. (Figure A) radio housing. (Figure C) 2. Attach the left and right a/c vent trim Continued on next page panels and the climate controls to the main radio housing panel using the provided (10) #8X1/2” Phillips screws and (2) #8X1/4” Pan head screws. (Figure B) (Figure A) (Figure C) NOTE: #8X1/4” Pan head screws must be installed in the indicated locations.
  • Página 6 All manuals and user guides at all-guides.com 99-7343 Kit Assembly 4. Attach the passenger air bag light to the main radio housing using (2) #8X1/2” Phillips screws. (Figure A) 5. Attach the display brackets to the display and mount it back into the dash in the factory location. (Figure B) Continued on next page (Figure A) (Figure B)
  • Página 7 All manuals and user guides at all-guides.com 99-7343 ISO DIN head unit provisions 1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2. Attach the DDIN brackets to the aftermarket radio using the screws supplied with the radio, then secure the assembly to the pocket using the (4) supplied #8 Truss head screws. (Figure A) 3. Mount the assembly into the sub dash. 4. Reassemble dash in reverse order of disassembly. (Figure A) Double DIN head unit provisions 1. Locate the factory wiring harness in the...
  • Página 8 All manuals and user guides at all-guides.com INSTALLATION INSTRUCTIONS FOR PART 99-7343 METRA. THE WORLD’S BEST KITS.™ metraonline.com 1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION...
  • Página 9 All manuals and user guides at all-guides.com INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7343 APLICACIONES Hyundai Sonata 2011 (para modelos equipados sin navegación y con controles de clima automáticos) 99-7343 CARACTERÍSTICAS DEL KIT • Provisión de unidad central ISO DIN con bolsillo •...
  • Página 10 – Provisiones de unidad central doble DIN ................7 PRECAUCIÓN: Metra recomienda desconectar el terminal negativo de la batería antes de comenzar cualquier instalación. Todos los accesorios, interruptores y, especialmente, las luces indicadoras de airbag deben estar enchufados antes de volver a conectar la batería o comenzar el ciclo de ignición.
  • Página 11 All manuals and user guides at all-guides.com Desmontaje del tablero 99-7343 Hyundai Sonata 2011 1. Desenganche y retire los 2 paneles de moldura que rodean la palanca de velocidades y el bolsillo. (Figura A) 2. Retire los (2) tornillos Phillips de la parte inferior izquierda y el lado derecho del panel de la moldura del radio.
  • Página 12 All manuals and user guides at all-guides.com Desmontaje del tablero 99-7343 Hyundai Sonata 2011 6. Desenganche y retire el interruptor de 8. Quite los (4) tornillos Phillips que las luces intermitentes del panel del sujetan el control del clima al panel del radio.
  • Página 13 All manuals and user guides at all-guides.com Ensamble del kit 99-7343 Ensamble del kit 1. Coloque a presión las rejillas del 3. Coloque a presión el interruptor de aire acondicionado en los panel las luces intermitentes en la carcasa de la moldura de la rejilla del aire principal del radio.
  • Página 14 All manuals and user guides at all-guides.com Ensamble del kit 99-7343 Ensamble del kit 4. Una la luz de la bolsa de aire del pasajero a la carcasa del radio principal utilizando (2) tornillos Phillips #8 x 1/2”. (Figura A) 5.
  • Página 15 Ensamble del kit 99-7343 Provisiones de unidad central ISO DIN 1. Ubique el arnés del cableado de fábrica en el tablero. Metra recomienda usar el adaptador de acoplamiento adecuado de Metra o AXXESS. Vuelva a conectar el terminal negativo de la batería y pruebe la unidad para verificar que funcione correctamente.
  • Página 16 All manuals and user guides at all-guides.com INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7343 METRA. THE WORLD’S BEST KITS.™ metraonline.com 1-800-221-0932 © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION...