Iso Din Radio Provision With Pocket - Metra 99-7426 Instrucciones De Instalación

DIN radio provision with pocket
1. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Slide the DIN cage into the radio
housing and secure by bending the
metal locking tabs down. (Figure A)
3. Slide the aftermarket radio into the
cage until it snaps into place.
(Figure B)
4. Snap the pocket into the radio
housing. (Figure C)
5. Reassemble dash in reverse
o rder of disassembly.
(Figure A)
Kit Assembly 99-7426
(Figure B)
(Figure C)

ISO DIN radio provision with pocket

1. Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Mount the ISO brackets to the radio
using the screws supplied with the
radio. (Figure A)
3. Slide the radio into the radio housing
until it snaps into place. (Figure B)
4. Snap the trim plate onto the front of
the radio housing. (Figure B)
5. Snap the pocket into the radio
housing. (Figure C)
6. Reassemble dash in reverse
o rder of disassembly.
3
(Figure A)
Right
side clip
(Figure B)
(Figure C)