Hyundai Santa Fe 2001-2006
1. Remove ashtray and (2) Phillips screws
exposed in cavity.
Unsnap and remove climate
controls with caution. The climate
controls have (2) clips that connect
with the radio bezel.
Remove (2) Phillips screws now
exposed under radio bezel (facing up).
Unsnap the bottom of the radio bezel,
then the top and pull straight back.
Remove (4) Phillips screws and remove
pocket from bezel.
Remove (4) Phillips screws to remove
radio from dash. (Figure A)
2. Attach spacer 3L and 4L to the left
mounting tabs of the radio housing and
spacer 3R and 4R to the right mounting
tabs of the radio housing as shown.
(Figure B)
Note: In cars with factory single DIN
radio and pocket, you may have to file
the inside edge of the factory bezel.
Continue to kit assembly
Dash Disassembly 99-7309
(Figure A)
(Figure B)
4
"3L"
"3L"
"3R"
"4R"