Metra 99-7344 Instrucciones De Instalación

Kia sportage 2011-up

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

INSTALLATION INSTRUCTIONS FOR PART 99-7344
Kia Sportage 2011-up
99-7344G, 99-7344CH
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted Gray or Charcoal to match factory finish
G = Gray, CH = Charcoal
KIT COMPONENTS
• A) Radio housing trim panel • B) Double DIN radio housing brackets • C) Pocket • D) (4) Panel clips
• E) (4) Phillips truss head screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7304 - Hyundai Kia harness 2010-up • HYBL-04 - HYU/KIA amp interface
Antenna Adapter: • Not required
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
METRA. The World's best kits.
C
D
1-800-221-0932
Dash Disassembly
– Kia Sportage 2011-up
Kit Preparation
– Kia Sportage 2011-up
Kit Assembly
ISO DIN radio provision with pocket
E
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
Table of Contents
...................................... 2
...................................... 3
................ 3

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Metra 99-7344

  • Página 1 INSTALLATION INSTRUCTIONS FOR PART 99-7344 Table of Contents Kia Sportage 2011-up 99-7344G, 99-7344CH Dash Disassembly – Kia Sportage 2011-up ........2 KIT FEATURES Kit Preparation • ISO DIN radio provision with pocket – Kia Sportage 2011-up ........3 • Painted Gray or Charcoal to match factory finish...
  • Página 2 99-7344 kit panel. (Figure E) remove the dash panel. (Figure B) Continue to kit preparation 3. Remove the two screws from the...
  • Página 3: Kit Preparation

    1. Locate the factory wiring harness in the dash. Metra recommends using 2. Attach the four included panel clips to the radio panel. (Figure A) the proper mating adapter from Metra or AXXESS. Re-connect the negative Continue to kit assembly battery terminal and test the unit for proper operation.
  • Página 4 INSTALLATION INSTRUCTIONS FOR PART 99-7344 NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
  • Página 5: Componentes Del Kit

    NSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7344 Tabla de contenido Kia Sportage 2011 y mas 99-7344G, 99-7344CH Desmontaje del tablero – Kia Sportage 2011 y mas ......... 2 CARACTERÍSTICAS DEL KIT Preparación del kit • Provisión de radio ISO DIN con bolsillo –...
  • Página 6: Kia Sportage 2011 Y Mas

    Las dos arriba de la guantera, a la derecha del cosas deben instalarse en el panel radio, y desenganche y quite el panel del kit 99-7344. (Figura E) del tablero. (Figura B) Continúe con la preparación del kit (Figura D) 3.
  • Página 7: Preparación Del Kit

    1. Instale el botón de las luces intermitentes y la pantalla que quitó del panel del radio de fábrica. 1. Ubique el arnés de cableado de fábrica en el tablero. Metra recomienda el 2. Una los cuatro ganchos del panel que se incluyen con el panel del radio. uso de un adaptador adecuado de (Figura A) acoplamiento de Metra o de AXXESS.
  • Página 8 NSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7344 EL CONOCIMIENTO ES PODER Mejore sus habilidades de instalación y NOWLEDGE IS OWER fabricación inscribiéndose en la escuela de Enhance your installation and fabrication skills by enrolling in the most recognized and respected dispositivos electrónicos móviles más reconocida...

Tabla de contenido