Dash Disassembly; Chevrolet Blazer/S-10 Pickup/Gmc Jimmy; Sonoma/Isuzu Hombre 1998-2001; Chevrolet Caprice/Impala 1994-1996 - Metra 99-3300 Instrucciones De Instalación

Chevrolet Blazer/S-10 Pickup/GMC Jimmy/

Sonoma/Isuzu Hombre 1998-2001

1. Remove (2) 9/32" screws securing the
driver's side knee bolster to the dash.
(Figure A)
2. Slightly pull down on the knee bolster
to expose the 9/32" screws securing the
base of the dashboard trim panel, then
remove the screws. (Figure A)
3. Remove (1) Phillips screw in the
instrument cluster.
4. Using the panel removal tool, carefully
unclip and remove the dashboard trim
panel, using caution not to damage the
hazard switch while removing the panel.
5. Remove (2) 9/32" screws securing the
factory radio, disconnect the wiring, and
then remove the radio.
Continue to Kit Assembly
2

DASH DISASSEMBLY

(Figure A)

Chevrolet Caprice/Impala 1994-1996

1. Remove (5) hex-head screws from the
ashtray cavity.
2. Extract (4) hex-head screws from the
base of the dash trim bezel.
3. Unsnap the fuse box cover and extract
(1) hex-head screw exposed.
4. Remove (2) hex-head screws above the
instrument cluster.
5. Turn the ignition on and place the gear
selector in "D1". Pull out and remove
the cluster trim.
6. Extract (1) hex-head screw exposed on
the left edge of the dash trim bezel.
7. Using the panel removal tool, carefully
unclip and remove the dash/radio
trim bezel.
8. Remove the screws securing the factory
radio, disconnect the wiring, and then
remove the radio.
Continue to Kit Assembly
(Figure B)
|
386.257.1187 MetraOnline.com