Dodge Viper 2003-2010 - Metra 99-6505 Instrucciones De Instalación

Dodge Viper 2003-2010

1. Using a panel removal tool, pry up
on the center console trim panel.
Be careful not to scratch the trim
panel. (Figure A)
2. Loosen the shifter lock nut below
the center console trim panel
(Figure A), and unscrew the shifter
knob. (Figure B)
3. Unplug the electrical connectors
and remove the center console
trim panel. (Figure C)
4. Remove (6) Allen screws from
the radio / climate control trim
panel, and (1) Phillips screw at the
bottom of the panel.
5. Unplug the electrical connectors
and remove the panel. (Figure D)
6.
Remove (4) screws securing the radio.
Disconnect and remove the radio
Continue to kit assembly
Dash Disassembly
(Figure A)
(Figure B)
.
99-6505
(Figure C)
(Figure D)
6