Metra 95-7331 Instrucciones De Instalación página 3

6. Unclip the rear trim panel from the center console, including
the a/c vents. Unplug and remove the rear trim panel. (Figure E)
7. Remove (1) Phillips screw from each side at the rear of the
center console. (Figure E)
8. Unclip the side panels from the front of the center console.
(Figure F)
Note: It is not necessary to remove these panels.
9. Remove (4) Phillips screws securing the center console, and
then lift and slide the center console back out of the way.
(Figure G)
Note: You do not have to take the center console all the way out.
10. Remove (1) Phillips screw from each side panel, and then
unclip and remove the panels. (Figure H)
11. Remove (4) Phillips screws securing the radio, and then
unplug and remove the radio.
12. Unclip and remove the switches and/or switch covers along
the top of the factory radio.
Note: Retain the switches and/or covers to be reinstalled in
the radio housing.
Continue to kit assembly
95-7331
Dash Disassembly
(Figure E)
(Figure F)
3
(Figure G)
(Figure H)