Making A Call - Tait T2010II Guia Del Usuario

Setting up
a call
Using the
Microphone
and the PTT
key
The Transmit
Timer
12
English

Making a Call

This section describes how to make a call from your
II
T2010 or your T2015
1 Select the channel you wish to use for the call, as
previously described.
2 Check the channel is free. Your radio's squelch
feature may prevent you from hearing certain activity
on the channel, so make sure the BUSY indicator is
not glowing.
3 Lift the microphone, squeeze the PTT key and
identify yourself and the person you wish to contact.
4 When you receive a reply, use the microphone to
converse, as described below.
The PTT key on the side of the microphone switches the
radio between receive and transmit mode.
Press the PTT key to talk, release it to listen.
The TX indicator glows while the radio is transmitting.
II
Your T2010 or T2015
timer that limits the length of transmissions. The radio
will sound a warning before it stops transmitting.
II
.
II
may be programmed with a