Important Information Concerning The Use Of The Present Operating Instructions; Scope Of Application; Technical Changes - Magontec CORREX MP 1.9- 900 Instrucciones De Uso

2. Important information concerning the use of the present
operating Instructions
Read this information before reading the Operating Instructions.
2.1

Scope of application

The present fitting and operating Instructions is applicable to the impressed-
current anode system CORREX
shown in the Annex.
The manual covers the following mountings:
Sleeve mounting
with screw G 3/4" brass
Insulated-hole mounting
with M8 thread bolt for 10.5 mm mounting hole
2.2 Anode types to be used
The impressed-current anode system CORREX
different types of anodes. Information about which type of anode is suited to
which type of hot-water tank can be obtained from the storage tank manufac-
turers who will also provide information on the length of anodes that can be
installed in the storage tank. This is particularly important if older storage
tanks are to be retrofitted with anodes. The corresponding specifications of
the storage tank manufacturer must be respected.
2.3 Fitting principle
All fitting instructions and sketches only show the fitting principle in sche-
matic form. Install CORREX
correspond to what is shown on the schematic drawings or to what can be
unambiguously inferred from them.
Do not install CORREX
2.4

Technical changes

The shapes and forms of the individual components can be changed at any
time without prior notice, especially if such changes are owed to technical
improvement or if so requested by the customer.
Operating Instructions CORREX
® MP 1.9-900 including the components
® MP 1.9-900 only if the actual fitting conditions
® MP 1.9-900 anodes if this is not the case.
® MP 1.9-900 is available with
® MP 1.9-900
23