LG PQNFG14B0 Manual De Instalación página 17

Click the
PCB 's Reset button
Check CNU Setting data
1) MAC : Device Address (Don't change)
2) IP : CNU internet address
3) Gateway : internet Gateway
4) Subnet : Subnet mask (Don't change)
1. type character "2"
3. Check the changed IP address
Change IP address
And Gateway
5) Load all info : total information
6) Central Controller Protocol : Select protocol '0' or
'1', refer next page.
7) Daytime Setting
8) Telnet Port : 23 (Don't change)
9) EXIT
2. type IP address 192.168.1.102 , and
Click ENTER key
4. If you finish setting, Type "9"
* Follow upper procedure and Change other
setting items properly
CNU setup method
Recheck the
Changed DATA
Installation Manual 17