Functions - Diamond AD2N/H2G-R2 Manual De Instalación, Uso Y Mantenimiento

ENGLISH
5.3.

Functions

Switching the appliance On and Off
Make sure the keyboard is not locked. Hold the
key down for two seconds: the
turn on / off.
Setting the working setpoint
Make sure the keyboard is not locked. Press and
GB
release the
the new working setpoint with
Confirm the new value with
Switching the cold room light On / Off
Make sure the keyboard is not locked. Press and
release the
To turn the light off press the
Enabling / Disabling the Overcooling function
Make sure the keyboard is not locked. Press the
button for at least 4 seconds. The
turn on. During the Overcooling function the
setpoint is
Overcooling function defrost is never enabled.
Enabling manual defrost
Make sure that the keyboard is not locked and
that the Overcooling function is not in progress.
Press the
the temperature of the evaporator probe is not
greater than the set limit, the defrost function is
enabled and the
is finished the
Enabling the Energy Saving function
Once the established time is over without opening
the doors, the Energy Saving function is enabled :
key: the led will flash. Set
.
key: the led will turn on.
key again.
increased by 1°C. During
button for at least 4 seconds. If
led will turn on. When defrost
led will turn off.
the led will turn on. The function stops the first
time the door is opened.
led will
Enabling the function for high or low humidity
Make sure the keyboard is not locked.
To view the current function press and release the
keys
"rhH" if the function for high percentage of
humidity is enabled, "rhL" if the function for low
percentage of humidity is enabled.
.
To change the function press the
keys for at least 4 seconds: the screen
displays "rhH" (high percentage of humidity
function) or "rhL" (low percentage of humidity
function).
Locking the keyboard
To lock the keyboard press the
keys for at least 1 second: the screen displays
"Loc" for 1 second. If the keyboard is locked, it
will not be possible to perform any operation: any
operation will cause the word "Loc" to appear on
the display screen. To unlock the keyboard press
the
will
the screen will display "UnL" for 1 second.
the
Setting the time and date
Make sure the keyboard is not locked.
Press the
displays the letters "rtc".
Press and release the
display "yy" followed by the last two numbers of
the year and the
and
year.
Press the
move on to changing the month: the screen will
8
and : the screen displays
and keys for at least 1 second:
key for 1 second: the screen
key: the screen will
LED will flash. With the keys
it is possible to set the current
key to memorise the date and
and
and