Alto Professional TS3 Serie Guia Del Usuario página 40

TS310
Output Power
Drivers
Crossover Frequency
Maximum SPL
Frequency Response
Frequency Range
Horn Coverage
Equalization
Connectors
Controls
Indicators
Power
Protection
Enclosure
Mounting/Installation
Dimensions
(height x width x depth)
Weight
40
2000 watts
(peak, 1300 LF + 700 HF)
Low-Frequency: 10.0" (254 mm) driver, 2.5" (65 mm) high-temperature
voice coil
High-Frequency: 1.4" (35 mm) neodymium driver with precision waveguide
2.5 kHz
129 dB , 126 dB
(peak)
54 Hz – 20 kHz
(+3 dB)
48 Hz – 22 kHz
(-10 dB)
90° horizontal x 60° vertical
Contour switch with low- and high-frequency +3 dB boost
(2) XLR+1/4" (6.35 mm) TRS combo inputs
(1) XLR output
(Link)
(1) IEC power cable input
Power switch, (2) volume control knobs
ground-lift switch
(2) power LEDs
(1 front panel, 1 rear panel)
Connection: IEC
Voltage: 100 V~, 110–120 V~, 220–240 V~, 50/60 Hz, switchable
Fuse: 100–120V T10AL AC250V, or 220–240V T5AL AC250V
Consumption: 800 W
Electronic clip, thermal and transducer overdrive protection
Trapezoidal, injection-molded, polypropylene with perforated steel grille
Standard 36 mm pole socket, wall or ceiling mount with TSB810 bracket,
suspended with integral M10 points, wedge monitor
20.6" x 12.6" x 11.8"
524 x 320 x 300 mm
26.1 lb.
11.8 kg
, 1000 watts
(continuous) (dB-SPL @ 1 m)
(nominal)
(1 per input)
, clip limiter LED
(continuous, 650 LF + 350 HF)
, contour switch,