Measuring Blood Pressure - Beurer BC 58 Instrucciones Para El Uso

If the battery change „
measurement is no longer possible and you must replace all
the batteries. Once batteries have been removed from the
device, the time must be reset.
Used batteries do not belong in the household waste. You
are legally obliged to dispose of the batteries. Dispose of
them via your specialist electrical supplier or local collec ting
point for recyclable waste.
Note: Batteries containing pollutant sub-
stances are marked as follows: Pb = Battery
contains lead,
Cd = Battery contains cadmium, Hg = Battery
contains mercury.
Setting date and time
You should set the date and time without fail. Otherwise,
you will not be able to save your measured values correctly
with a date and time and to access them again later.
The time is displayed in the 24-hour format.
Tip: If you press and hold the "MEM" button, you can set
the values more quickly.
To set the date and time, proceed as follows:
position.
ously. The year display will start to flash. Set the year with
the "MEM" button and confirm with "START/STOP".
" is continuously illuminated,
each setting with "START/STOP".
display off.

5. Measuring blood pressure

Please ensure the device is at room temperature before
measuring.
Positioning cuff
-
Important:
16