4. Thread the extension hose into the spark plug hole
until the o-ring seats; do not use pliers or a wrench to
tighten.
5. Attach the Air Hold Adapter to the extension hose.
6. Attach a shop air hose to the Air Hold Adapter, this will
maintain air pressure in the cylinder to hold the valves
closed while performing repairs. (It may be necessary
to rotate the engine until all valve are closed and air is
holding in the cylinder)
Note: Air Hold quick connector does not come with a
compressed air line fitting to adapt to your air source.
This will have to be purchased separately to fit your
system.
Contacting Lincoln Industrial Corp.
Lincoln Industrial Corporation,
One Lincoln Way,
St. Louis, MO 63120
Phone: (314) 679-4200 Ext. 4410
Fax: (800) 424-5359
E-mail: custserv@lincolnindustrial.com
For technical questions, please contact our Technical Ser-
vice Department:
Phone:(314) 679-4200 Ext 4782
Fax: (314) 679-HELP (4357)
E-mail: techserv@lincolnindustrial.com
Visit our Web Site at: www.mityvac.com
LIMITED WARRANTY
Lincoln warrants the equipment manufactured and supplied by Lincoln to be free from defects in material and workmanship for a period
of one (1) year following the date of purchase, excluding therefrom any special, extended, or limited warranty published by Lincoln. If
equipment is determined to be defective during this warranty period, it will be repaired or replaced, within Lincoln's sole discretion, with-
out charge.
This warranty is conditioned upon the determination of a Lincoln authorized representative that the equipment is defective. To obtain
repair or replacement, you must ship the equipment, transportation charges prepaid, with proof of purchase to a Lincoln Authorized War-
ranty and Service Center within the warranty period.
This warranty is extended to the original retail purchaser only. This warranty does not apply to equipment damaged from accident,
overload, abuse, misuse, negligence, faulty installation or abrasive or corrosive material, equipment that has been altered, or equipment
repaired by anyone not authorized by Lincoln. This warranty applies only to equipment installed, operated and maintained in strict ac-
cordance with the written specifications and recommendations provided by Lincoln or its authorized field personnel.
THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE WARRANTY OF MERCHANTIBILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
In no event shall Lincoln be liable for incidental or consequential damages. Lincoln's liability for any claim for loss or damages arising
out of the sale, resale or use of any Lincoln equipment shall in no event exceed the purchase price. Some jurisdictions do not allow the
exclusion or limitation of incidental or consequential damages, therefore the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights. You may also have other rights that vary by jurisdiction.
Customers not located in the Western Hemisphere or East Asia: Please contact Lincoln GmbH & Co. KG, Walldorf, Germany, for your
warranty rights.
Lincoln Industrial Contact Information
To find Lincoln Industrial's Nearest Service Center
Call one of the following numbers, you may also use our Website
Page Number - 6
Lincoln Industrial Standard Warran
Customer Service 314-679-4200
Website: lincolnindustrial.com
TO AVOID PERSONAL INJURY AND/OR VEHICLE
DAMAGE:
While some precautions are specified in this manual,
and should be noted to avoid personal injury or vehicle
damage, it is not possible for these cautions to cover all
conceivable ways in which service or testing might be
done, or all possible hazardous consequences of each
way, nor could Lincoln possibly know or investigate all
such ways. It is therefore the responsibility of anyone
using this manual or any other Mityvac product, to satisfy
him or herself completely that neither personal safety nor
vehicle safety will be jeopardized by the service methods
selected. Any such injury or damage is entirely the user's
responsibility. This device is not to be used in any man-
ner on the human body.
ty
Form 822856