Samsung DW80F800UWS Manual Del Usuario página 20

Ocultar thumbs Ver también para DW80F800UWS:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

m int ning
©UF
Keeping your dishwasher clean improves its performance
reduces unnecessary
repairs, and lengthens its life.
CLEANING
THE EXTERIOR
It's best to clean spills on the outside of your dishwasher
as they occur. Use a soft, damp cloth on the
control
panel to gently wipe away spills and dust. Do not use benzene,
wax, thinner, chlorine bleach,
or
alcohol.
These materials
may discolor
the inner walls and cause stains. Do not clean the dishwasher
by
sprinkling
water
over it and avoid letting water come into contact
with any of the electrical
parts.
J_lf
your dishwasher
has a stainless steel door panel, you can clean it with a stainless
steel cleaner for
Home Appliances
or similar product
using a clean, soft cloth.
CLEANING
THE iNTERiOR
Clean the interior of your dishwasher
periodically
to remove any dirt or food particles. Wipe the inside of
the dishwasher
and the inner part of the door with a wet dishcloth.
We recommend
filling the detergent
dispenser
with dish detergent,
and then running the dishwasher
empty
periodically
using either the Normal
or Quick cycle with the sanitize option. This will keep your dishwasher
clean.
If white spots and odor are still present
in your dishwasher,
run the Normal cycle with the dishwasher
empty
and without
detergent
until it flushes.
Then, interrupt the cycle and put an 8 ounce cup of white vinegar
into
the lower basket.
Close the dishwasher
and let the cycle finish.
Do not remove the tub front seal (the long rubber
seal enclosing
the opening
of the dishwasher).
CAUTION
CLEANING
THE NOZZLES
If your dishwasher
does not seem to be cleaning
adequately
or the nozzles seem clogged,
you can clean
each of the nozzles. When removing
the nozzles, take care as they may break.
Lower
nozzle
t.
Check whether
the nozzle holes are
clogged
by food particles.
2.
If cleaning
is needed,
remove the nozzle by
pulling it upwards.
3.
Clean the nozzle, and then push it back
into place.
4.
Check whether
the nozzle is engaged
correctly
by rotating it by hand.
20
cleaning and maintaining
DW80F800
DDS1-01554A-01
£N.indd
Sec5:20
2013-06-04
CC 11:24:41
I

Publicidad

Tabla de contenido
loading

Tabla de contenido