Samsung DW80F800UWS Manual Del Usuario página 24

Ocultar thumbs Ver también para DW80F800UWS:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

tZ LAb , hootiN
The water supplied
is soft and too
Leaves
glasses
with
much detergent
was used.
a dim polish:
Aluminum
dishes were included
in
the wash load.
Leaves a yellow
This is caused
by coffee and tea
or brown
film on
soils.
the inside
of the
dishwasher.
Does not dry dishes
There is no rinse aid in the
dispenser.
The temperature
of the water
is low when the dishwasher
is
running.
Too many dishes have been
loaded.
Glasses and cups with concave
bottoms
hold water. This water
may spill onto other items when
unloading.
Water was left over from an
incomplete
cycle.
The Drain Hose is obstructed.
Has a bad odor.
The dishwasher
is not used daily
or soiled dishes are left in unit too
long.
Sound
is generated
when
the
dispenser
cover is open and the
drain pump is operating
in an early
stage.
The dishwasher
is not level.
Is too noisY.
Foreign material (a screw, a plastic
piece) is in the pump chamber.
There is a 'chopping'
sound
because
a nozzle is bumping
against the dishes.
Underload
the dishwasher
and use a rinse
aid to minimize
this.
Remove the marks on the dishes using a
low sensitivity
cleaner.
Remove the soils using a spot cleaner.
Check the dispenser
and add the rinse aid.
Use a liquid type rinse aid.
Connect
the water
supply line to a hot
water supply.
Use rinse aid with the Sanitize option.
Proper loading of items can affect drying.
Load your dishes as recommended.
(See
page 16.)
After finishing the cycle, empty the lower
rack first and then the upper rack. This will
_revent water dripping
from the upper rack
onto the dishes in the lower rack.
Insert detergent
without
loading dishes,
and run the Normal cycle to clean the
dishwasher.
Contact
a qualified service technician
to
remove any obstruction
from the drain
hose.
With the dishwasher
empty and no
detergent,
place a glass with 8
ounces
of vinegar upright
into the lower
rack, and then run a Normal
cycle.
This is normal operation.
Ensure the dishwasher
is level.
Contact
a qualified service technician
to
remove foreign material from the pump
chamber.
Rearrange
the dishes.
24 troubleshooting
DW80F800
DDS1-01554A-01
EN.indd
Sec7:24
2013-06-04
ZC 11:24:42
I

Publicidad

Tabla de contenido
loading

Tabla de contenido