Transcend 365 miniCPAP Manual De Usuario página 18

Transcend 365 miniCPAP Quick Guide Page 18
Ending Therapy and Entering Drying Mode
When you are finished with your therapy session, press the Center button to return your
CPAP to Standby mode. Press and hold the Up and Down buttons for three seconds to
start Drying Mode. This mode will last 30 minutes unless you interrupt it by pressing any
button. After the 30-minute drying cycle, the blower will turn off and the device will
automatically enter Standby Mode.
Dry mode flushes your CPAP device, tubing and mask of any residual moisture left from
a therapy session.
Push and hold the Up and
Down buttons to enter
Drying Mode
Caution: Do not attempt to use the Transcend 365 miniCPAP while in Drying
mode. The device will not provide the prescribed therapy pressure while in
Drying mode.
The Transcend 365 miniCPAP Humidifier
The Transcend 365 miniCPAP is the only continuous positive airway pressure (CPAP)
device licensed to use advanced, built-in Capillary Force Vaporization™ (CFV)
humidification technology. CFV instantaneously combines humidified vapor with the
airstream on inhalation for warm, moist, comfortable airflow. This unique humidifier
utilizes a wick to draw distilled water up to the heating element, which then delivers warm
vapor upon inhalation. This specialized method of delivering humidification requires less
water, significantly reducing the size of the humidifier.
Caution! Use distilled water only. The use of distilled water is required for proper
function of the heated humidifier. Failure to use distilled water will damage the
humidifier and require repair or replacement. Alternatively, water may be filtered with the
Transcend Portable Water Filter for use with your Transcend 365 miniCPAP humidifier.
The ZeroWater™ Portable Filter Replacement Cartridge can be purchased directly from
your Transcend dealer, or at most major retailers.