Brinkmann SMOKE'N GRILL DS-30 Manual Del Propietário página 7

INSTR_810-5302-S.QXD 11/1/07 11:42 AM Page 7
STEP 6
a. Attach a handle assembly on top of dome lid using 10-24 x s" screws
and square nuts.
b. Install heat indicator in dome lid by aligning tabs on heat indicator with
slots in the opening on front of dome lid. Insert and turn 4 revolution
until the word "IDEAL" on the heat indicator is at the top of the dial.
c. Place dome lid on upper support brackets of smoker body.
NOTE:
IMPORTANT:
READ ALL SAFETY WARNINGS AND OPERATING INSTRUCTIONS
The dome lid is not designed to fit snugly in the smoker body.
The gap between the dome lid and smoker body allows proper
air draft and circulation.
YOUR CHARCOAL SMOKER
IS NOW COMPLETELY ASSEMBLED.
Before first use and after cleaning, apply a light coat of
vegetable oil or vegetable cooking spray to the interior
surface of the dome lid, smoker body, cooking grills and
water pan. This simple process will help reduce interior
rusting. DO NOT apply oil to the charcoal pan.
PRIOR TO USING YOUR SMOKER.
BRINKMANN
DALLAS, TX 75244
6