Pioneer ELITE SC-LX502 Manual Básico página 16

> Before Start > Part Names
a Speaker Cable
16
> Install > Initial Setup
3/8˝
(10 mm)
a
> Playback
Connecting with Bi-Amping Speakers (Page 13)
Make sure you remove the jumper bar fitted between the
woofer jacks and tweeter jacks of the front speakers. Refer
to "Standard Connections (Pages 8 to 12)" (P15) to connect
the center speaker, surround speakers, and powered
subwoofer.
0 Also refer to the instruction manual for your speakers
when using connections for Bi-Amping.
Setup
0 Settings for the speaker configuration you have
connected need to be made in "1. Full Auto
MCACC" in Initial Setup (P26).
Make sure the exposed speaker cables do not
stick out of the speaker terminals when
connecting. If the exposed wires of the
speakers touch the rear panel or the + and –
For high-
wires touch each other, the protection circuit
frequency
will be activated.
For low-
frequency