Leak Testing; Checking For Leaks - Charmglow 810-2320-B Manual Del Propietário

INS_810_2320_B_Charmglow-new.qxd

LEAK TESTING:

To prevent fire or explosion hazard:
• DO NOT smoke or permit ignition sources in the area while conducting a leak test.
• Perform test OUTDOORS only in a well ventilated area.
• Never perform a leak test with a match or open flame.
• Never perform a leak test while the grill is in use or while grill is still hot.
WHEN TO PERFORM A LEAK TEST:
• After assembling your grill and before lighting for the first time, even if purchased fully assembled.
• Every time the LP gas cylinder is refilled or if any of the gas components are replaced.
• Any time your grill has been moved.
• At least once per year or if your grill has not been used for more than 60 days.

CHECKING FOR LEAKS:

1 . Create a mixture of 50% water and 50% liquid dishwashing soap.
2 . Open the lid.
3 . Ensure all control knobs are set to the "OFF" position.
4 . Turn on the fuel supply at the cylinder valve. Turn the
cylinder valve knob one turn counter-clockwise.
5 . Apply the soap water mixture to the following:
Supply tank (cylinder) weld.
A
Connection nut to tank valve.
B
C Back side of connection nut to brass
n i p p l e .
Brass nipple connection into regulator.
D
Regulator connections to gas supply
E
h o s e s .
Gas supply hose connection to side
F
burner valve assembly.
Side burner valve stem cap.
G
Side burner connection to hose.
H
Hose connection to gas manifold.
I
The full length of gas supply hose.
J
Tank valve to cylinder.
K
10/6/04 5:22 PM Page 10
D A N G E R
WA R N I N G
Watch For Bubbles
F
I
J
E
K
D
C
B
A
G
H
8