Philips SC1996 Manual De Usuario página 25

Problem Possible cause
The 'ready to flash' The skin you are
light first blinks trying to treat is
orange and then too dark.
lights up orange
continuously
when I place
the appliance on
the skin and the
appliance does not
release a flash.
The 'ready to The overheat
protection has
flash' light does
not work when been activated.
I place the
attachment on
my skin, but the
cooling fan works.
The 'ready to The appliance
flash' light lights up needs to be reset.
continuously, but
the appliance does
not produce a
flash when I press
the flash button.
Intensity light The attachment is
1 continues to not placed on the
blink and I cannot appliance properly.
change the setting.
All intensity lights The appliance
go on alternately. needs to be reset.
All intensity The appliance is
lights are blinking defective.
simultaneously.
The appliance The attachment
produces a strange and/or the filter
smell. glass is dirty.
You have not
shaved the area
to be treated
properly.
Solution
To prevent your skin from developing side effects, the
appliance does not work on skin that is too dark. You might
be able to use Philips Lumea Essential on lighter coloured
body parts. If this does not work either, contact the
Consumer Care Centre in your country, your Philips dealer
or a Philips service centre.
When the overheat protection has been activated, the fan
still works. Do not switch off the appliance. Let it cool down
for approx. 15 minutes before you continue to use it. After
5 minutes the appliance switches off automatically. Then let
it cool down for 10 more minutes. If the 'ready to flash' light
still does not work when you place the appliance on the
skin, contact the Consumer Care Centre in your country,
your Philips dealer or a Philips service centre.
To reset the appliance, switch off the appliance and switch
it on again. If the 'ready to flash' light lights up continuously,
but the appliance still does not produce a flash when you
press the flash button, contact the Consumer Care Centre
in your country, your Philips dealer or a Philips service centre.
Place the attachment on the appliance properly.
To reset the appliance, switch off the appliance and switch it
on again. If the intensity lights continue to go on alternately,
contact the Consumer Care Centre in your country, your
Philips dealer or a Philips service centre.
Contact the Consumer Care Centre in your country, your
Philips dealer or a Philips service centre.
Clean the attachment and the light exit window carefully.
If you are unable to clean the attachment properly, contact
the Consumer Care Centre in your country, your Philips
dealer or a Philips service centre to replace the attachment.
If there are hairs on the area to be treated, these hairs may
get burnt when you use the appliance. As a result, you notice
a strange smell. Shave the area to be treated properly before
you use the appliance. If shaving causes skin irritation, trim
hairs as short as possible and use the Philips Lumea Essential
at a comfortable setting.
ENGLISH
25